The Quick and Easy Way to Make a Mould Using Silicone Putty

Phrases reminiscent of silicone putty, silicone mould making, press moulds and launch brokers can be described on this article to help you to make easy moulds reminiscent of jewelry moulds this new simple manner, utilizing silicone putty.

Silicone putty has been utilized by the dental career for a few years. It has not too long ago turn into a value efficient substitute for making easy press-in moulds which are appropriate to be used within the meals business.

It ought to be famous that Silicone Putty, though a dental product, has not been registered with the authorities as a meals grade product.

The putty has a consistency of dough and is straightforward to work with. The associated fee effectiveness is realized since you solely want the precise quantity of putty to cowl the floor of the thing and to make a small lip across the object.

Making a Silicone Putty Mould:

Step 1:

Use equal elements of half A and half B of the putty. Combine collectively by kneading till the color is constant.

Step 2:

Utilizing your fingers, roll the putty right into a ball and flatten it to about twice the thickness and width of the thing for use.

Place the thing you want to duplicate on some grease proof paper. Spray the thing with a light-weight coat of launch agent such cooking oil.

Step 3:

Now start to roll a ball of the putty excessive of the thing, slowly pushing it steadily together with your thumbs until the thing is roofed. Make a lip of about 1cm across the object with the putty to allow the mould to be held in a steady degree place through the casting.

Notice:The clay is pressed over the thing reasonably than pushing the thing into the putty and embedding it, as this sluggish motion pushes the air forward and prevents air bubbles being embedded within the mould.

Step 3:

The method time for working with silicone putty is about 3 minutes. To completely treatment silicone putty takes between 20 minutes and an hour. Utilizing warmth can velocity up the curing course of. The item could be left within the mould in a single day to make sure correct curing.

Curing with Warmth:

As soon as the thing has been faraway from the silicone putty mould curing could be expedited by utilizing warmth. To treatment utilizing warmth, place the thing on a sheet of tinfoil inside an oven. DO NOT use a toaster oven. Set the oven rack in order that the mould is a minimum of 15-20cm away from the heating factor. Warmth the mould for one hour at a temperature between 150-200º C.

Care of Meals Moulds:

Meals moulds created from meals grade silicone putty, ought to solely be used for meals and NEVER for some other function. They need to be washed and cleaned after every use by utilizing heat soapy water and left to dry. Moulds can be utilized in standard ovens at temperatures as much as 200ºC.

Low Temperature Alloy Steel Casting:

Low temperature melting alloy metals could be solid into silicone putty moulds so long as the temperature doesn’t exceed 200ºC. It can be crucial that previous to starting a steel casting challenge the producers MSDS sheets ought to be consulted to make sure that the requirements of use are being met. This would come with temperature, toxicity and protected dealing with of the supplies are understood. It goes with out saying that use of protecting gear ought to all the time be a precedence when working with molten metals. This would come with hand and eye safety in addition to a heavy gauge apron.


Retailer the unique object within the mould by inserting the 2 in a cool, dry location. This may assist the mould to retain the unique objects form and assist to forestall distortion.

Mould Making Issues:


  • Mixing silicone putty has roughly a 3 minute time-frame. Putty tends to get hotter and tougher to work with if the three minute window is exceeded.
  • Streaks in color are a results of improper kneading of the Custom Silicone Spoon Rest silicone. Improper kneading can even result in delicate and uncured sections of the mould. Knead till the color is constant.
  • If the mould has a tough texture it is because of improper curing. Fuel inside the silicone has induced air bubbles.


©2011 Aldax Enterprises Pty Ltd

Stan Alderson is a chemist with over 25 years of sensible mould making and casting expertise. He has a selected curiosity in helping new enterprise entrepreneurs.

Leave a Reply

Your email address will not be published. Required fields are marked *